Overview

CCNPBuildingScalable Internetworks (BSCI 642-901) Lab Portfolio provides you with opportunities for hands-on practice to master the technologies necessary to configure advanced routing on a production network.   The labs reinforce your understanding of how to install, configure, monitor, and troubleshoot network infrastructure equipment. You will apply your knowledge of configuration of EIGRP, OSPF, IS-IS, and BGP routing protocols and how to manipulate and optimize routing updates between these protocols. Other topics covered include multicast routing, IPv6, and DHCP configuration.   Those preparing for the Building Scalable Cisco Internetworks (BSCI 642-901) certification exam should work through this book cover-to-cover. Or if you need to quickly review configuration examples, you can go directly to the relevant chapter.   CCNPBuildingScalable Internetworks (BSCI 642-901) Lab Portfolio includes 33 Labs built to support v5 of the Building Scalable Internetworks course within the Cisco® Networking Academy® curriculum providing ample opportunity to practice. 6 Challenge and Troubleshooting Labs have been added to the Lab Portfolio to further test your mastery of the topics. 4 Case Studies provide practice in planning, designing, and implementing EIGRP, OSPF, and BGP networks. Even if you do not have the actual equipment to configure these more complex topologies, it is worth reading through these labs to expand your thinking into more complex networking solutions.   By successfully completing the exercises in this book you will gain the experience necessary to use advanced IP addressing and routing in implementing scalability for Cisco integrated services routers (ISR) connected to LANs and WANs.

Full Product Details

Author:   David Kotfila ,  Joshua Moorhouse ,  Ross Wolfson
Publisher:   Pearson Education (US)
Imprint:   Cisco Press
Dimensions:   Width: 21.30cm , Height: 3.20cm , Length: 27.60cm
Weight:   1.320kg
ISBN:  

9781587132131

ISBN 10:   1587132133
Pages:   600
Publication Date:   20 December 2007
Audience:   College/higher education ,  Tertiary & Higher Education
Format:   Paperback
Publisher's Status:   Out of Print
Availability:   In Print  
Limited stock is available. It will be ordered for you and shipped pending supplier's limited stock.

Table of Contents

Chapter 1 Scalable Network Design 1 Lab 1-1: BSCI Lab Configuration Guide (1.5.1) 1 Lab 1-2: TCL Script Reference and Demonstration (1.5.1) 3     Quick TCL Reference 3     Step 1: Initial Configuration 4     Step 2: Verify Connectivity 5     Step 3: Resolve Connectivity Issues 10 Conclusion 14   Chapter 2 EIGRP 15 Lab 2-1: EIGRP Configuration, Bandwidth, and Adjacencies (2.7.1) 15     Scenario 15     Step 1: Addressing 16     Step 2: Configuring EIGRP Across VLAN1 17     Step 3: Verifying the EIGRP Configuration 19     Step 4: Configuring EIGRP on the Serial Interfaces 20     Step 5: Configuring Network Statement Wildcard Masks 22     Challenge: Topology Change 23 Lab 2-2: EIGRP Load Balancing (2.7.2) 26     Scenario 26     Step 1: Addressing and Serial Configuration 26     Step 2: EIGRP Configuration 29     Step 3: EIGRP Topology Table 32     Step 4: Equal-Cost Load Balancing 34     Step 5: Alternate EIGRP Paths Not in the Topology Table 35     Step 6: Unequal-Cost Load Balancing 38     Initial Configurations 45     TCL Script Output 47 Lab 2-3: Summarization and Default Network Advertisement (2.7.3) 53     Scenario 53     Step 1: Initial Configuration 54     Step 2: Summarization Analysis 57     Step 3: EIGRP Auto-Summarization 61     Step 4: EIGRP Manual Summarization 70     Step 5: Default Network Advertisement 72     Conclusion 77     TCL Script Output 79     Analyzing Major Networks 86 Lab 2-4: EIGRP Frame Relay Hub and Spoke: Router Used as Frame Switch (2.7.4) 89     Scenario 90     Step 1: Addressing 90     Step 2: Configuring the Frame Relay Switch 91     Step 3: Configuring the Frame Relay Endpoints 92     Step 4: Setting Interface-Level Bandwidth 94     Step 5: Configuring EIGRP 95     Step 6: Using Nonbroadcast EIGRP Mode 99     Step 7: Implementing EIGRP Manual Summarization 100     TCL Script Output 102 Lab 2-5: EIGRP Frame Relay Hub and Spoke: Adtran Used as Frame Switch (2.7.4) 110     Scenario 111     Step 1: Addressing 111     Step 2: Frame Relay Network 112     Step 3: Configuring the Frame Relay Endpoints 113     Step 4: Setting Interface-Level Bandwidth 114     Step 5: Configuring EIGRP 115     Step 6: Using Nonbroadcast EIGRP Mode 119     Step 7: Implementing EIGRP Manual Summarization 120     TCL Script Output 122 Lab 2-6: EIGRP Authentication and Timers (2.7.5) 131     Scenario 131     Step 1: Addressing 131     Step 2: Configuring Basic EIGRP 133     Step 3: Configuring Authentication Keys 134     Step 4: Configuring EIGRP Link Authentication 135     Step 5: Manipulating EIGRP Timers 139     TCL Script Output 142 Lab 2-7: EIGRP Challenge Lab (2.7.6) 147 Lab 2-8: EIGRP Troubleshooting Lab (2.7.7) 148     Initial Configurations 148   Chapter 3 OSPF 151 Lab 3-1: Single-Area OSPF Link Costs and Interface Priorities (3.11.1) 151     Scenario 151     Step 1: Addressing 152     Step 2: Adding Physical Interfaces to OSPF 153     Step 3: OSPF show Commands 154     Step 4: Adding Loopback Interfaces to OSPF 157     Step 5: Modifying Link Costs in OSPF 159     Step 6: Modifying Interface Priorities 161     Challenge: Topology Change 162     TCL Script Verification 163 Lab 3-2: Multiple-Area OSPF with Stub Areas and Authentication (3.11.2) 167     Scenario 167     Step 1: Addressing 167     Step 2: Adding Interfaces into OSPF 168     Step 3: Stub Areas 171     Step 4: Totally Stubby Areas 173     Step 5: Not So Stubby Areas 176     Step 6: OSPF Interface Authentication 181     TCL Script Output 182 Lab 3-3: OSPF Virtual Links and Area Summarization (3.11.3) 187     Scenario 187     Step 1: Addressing 188     Step 2: Adding Interfaces into OSPF 189     Step 3: Creating a Virtual Link 190     Step 4: Summarizing an Area 193     Step 5: Generating a Default Route into OSPF 195     Challenge: Configure OSPF Authentication 197     TCL Connectivity Verification 197 Lab 3-4: OSPF over Frame Relay Using a Router as the Frame Relay Switch (3.11.4a) 202     Scenario 203     Step 1: Addressing 203     Step 2: Setting Up NBMA OSPF 204     Step 3: Changing the Network Type to Point-to-Multipoint 205     Step 4: Changing OSPF Timers 207     Challenge: Minimal Hello Intervals 208     TCL Connectivity Verification 209 Lab 3-5: OSPF Over Frame Relay Using an Adtran as the Frame Relay Switch (3.11.4b) 213     Scenario 213     Step 1: Addressing 214     Step 2: Setting Up NBMA OSPF 215     Step 3: Changing the Network Type to Point-to-Multipoint 216     Step 4: Changing OSPF Timers 218     Challenge: Minimal Hello Intervals 219     TCL Connectivity Verification 220 Lab 3-6: OSPF Challenge Lab (3.11.5) 224 Lab 3-7: OSPF Troubleshooting Lab (3.11.6) 225     Initial Configurations 226   Chapter 4 IS-IS 229 Lab 4-1: Configuring Basic Integrated IS-IS (4.7.1) 229     Scenario 229     Step 1: Addressing and Basic Connectivity 230     Step 2: Configuring Basic IS-IS 230     Step 3: Verifying IS-IS Adjacencies and Operation 231     Step 4: Converting to the IS-IS Backbone 237     Step 5: Manipulating the IS-IS Interface Timers 239     Step 6: Implementing IS-IS L2 Core Authentication 240     Step 7: Implementing IS-IS Domain Authentication 241     TCL Script Output 243 Lab 4-2 Multi-Area Integrated IS-IS (4.7.2) 246     Scenario 246     Step 1: Addressing and Initial Configuration 246     Step 2: Verify IS-IS Initial Operation 247     Step 3: Configure IS-IS Area 2 248     Step 4: Verify IS-IS Multi-Area Operation 248     Step 5: Configure IS-IS Domain Authentication 250     Step 6: Reconfigure IS-IS Area 1 251     Step 7: Reconfigure R3 IS-IS Operation 254     Step 8: Verify IS-IS Intra-Area Operation 255     Reflection 257     TCL Script Output 257 Lab 4-3: Configuring IS-IS over Frame Relay: Router Used as Frame Switch (4.7.3a) 260     Scenario 261     Step 1: Addressing and Basic Configuration 261     Step 2: Frame Relay Configuration 261     Step 3: Configure and Verify IS-IS over Frame Relay 263     Step 4: Verify IS-IS Connectivity 265     Step 5: Demonstrate IS-IS Interface-Type Mismatch 265     Router as Frame Relay Switch Configuration 267     TCL Script Output 268 Lab 4-4: Configuring IS-IS over Frame Relay: Adtran Used as Frame Switch (4.7.3b) 271     Scenario 271     Step 1: Addressing and Basic Configuration 271     Step 2: Frame Relay Configuration 272     Step 3: Configure and Verify IS-IS over Frame Relay 274     Step 4: Verify IS-IS Connectivity 276     Step 5: Demonstrate IS-IS Interface-Type Mismatch 276     TCL Script Output 278 Chapter 5 Route Optimization 281 Lab 5-1: Redistribution Between RIP and OSPF (5.6.1) 281     Scenario 282     Step 1: Assign Addresses 282     Step 2: Configure RIPv2 284     Step 3: Configure Passive Interfaces in RIP 286     Step 4: Summarize a Supernet with RIP 288     Step 5: Suppress Routes Using Prefix Lists 290     Step 6: Configure OSPF 292     Step 7: Configure Passive Interfaces in OSPF 293     Step 8: Allow One-Way Redistribution 295     Step 9: Redistribute Between Two Routing Protocols 297     Step 10: Set a Default Seed Metric 297     Step 11: Change the OSPF External Network Type 298     Challenge: Use Extended Access Lists for Filtering 299     TCL Script Output: Steps 8 and 9 300 Lab 5-2 Redistribution Between EIGRP and OSPF (5.6.2) 307     Scenario 307     Step 1: Additional Addressing 308     Step 2: Configuring EIGRP 308     Step 3: Create Passive Interfaces in EIGRP 309     Step 4: Manually Summarize with EIGRP 311     Step 5: Additional OSPF Configuration 312     Step 6: Summarize OSPF Areas at the ABR 314     Step 7: Mutually Redistribute Between OSPF and EIGRP 315     Step 8: Filter Redistribution with Route Maps 319     Step 9: Summarize External Routes into OSPF at the ASBR 320     Step 10: Modifying EIGRP Distances 321     Step 11: Modifying OSPF Distances 322     Challenge: Change Administrative Distance on R2 324     TCL Script Output 325     Exploring Black Hole Operation 333 Lab 5-3: Redistribution Between EIGRP and IS-IS (5.6.3) 337     Scenario 337     Step 1: Assign Addresses 338     Step 2: Configure EIGRP 339     Step 3: Configure IS-IS 340     Step 4: Mutually Redistribute Between IS-IS and EIGRP 342     Step 5: Filter Network Addresses with Route Maps 344     Step 6: Filter Prefixes with Route Maps 347     Step 7: Summarize Addresses in IS-IS 349     TCL Script Output 350 Lab 5-4: Manipulating Administrative Distances (5.6.4) 357     Scenario 357     Pre-Lab: Review of Administrative Distances 358     Step 1: Configure Addressing 358     Step 2: Configure RIP 359     Step 3: Configure OSPF 362     Step 4: Modify a Routing Protocol’s Distance 366     Step 5: Modify Distance Based on Route Source 368     Step 6: Modify Distance Based on an Access List 370     Challenge 373 Lab 5-5: Configuring the Cisco IOS DHCP Server (5.6.5) 374     Scenario 374     Step 1: Assign IP Addresses 374     Step 2: Configure EIGRP 375     Step 3: Configure a DHCP Pool 376     Step 4: Verify DHCP Lease on Client 379     Step 5: Verify DHCP Configuration on Server 380     Step 6: DHCPRELEASE and DHCPRENEW 381     Step 7: Configure the IP Helper Address 385     Challenge: Apply Per-Protocol Forwarding 386     Chapter 6 BGP 387 Lab 6-1: Configuring BGP with Default Routing (6.7.1) 387     Scenario 387     Step 1: Assign IP Addresses 387     Step 2: Configure the ISPs 388     Step 3: Configure SanJose BGP 388     Step 4: Verify BGP on the SanJose Router 389     Step 5: Filter Routes 390     Step 6: Configure the Primary and Backup Routes Using Floating Static     Routes 390     Step 7: Configure Primary and Backup Routes Using Static Routes 392     TCL Verification 395 Lab 6-2: Using the AS_PATH Attribute (6.7.2) 399     Scenario 399     Step 1: IP Addressing 399     Step 2: Configure BGP 400     Step 3: Remove the Private AS 400     Step 4: Use the AS_PATH Attribute to Filter Routes 401     TCL Output 402 Lab 6-3: Configuring IBGP and EBGP Sessions, Local Preference, and MED (6.7.3) 406     Scenario 406     Step 1: IP Addressing 406     Step 2: Configure EIGRP 407     Step 3: Configure IBGP 407     Step 4: Verify BGP Neighbors 407     Step 5: Configure EBGP 407     Step 6: Verify BGP Neighbors 408     Step 7: View BGP Summary Output 408     Step 8: Verify Which Path Traffic Takes 408     Step 9: BGP Next-Hop_Self 412     Step 10: Set BGP Local Preference 414     Step 11: Set BGP MED 415     Step 12: Establish a Default Network 419     TCL Verification 420 Lab 6-4: BGP Route Reflectors and Route Filters (6.7.4) 425     Scenario 425     Step 1: Configure RIPv2 425     Step 2: IBGP Peers and Route Reflectors 426     Step 3: Inject an External Route into BGP 427     Step 4: Inject a Summary Address into BGP 428     TCL Verification 429   Chapter 7 IP Multicasting 433 Lab 7-1: Implementing IGMP and IGMP Snooping (7.5.1) 433     Scenario 433     Overview 433     Step 1: Configure Hosts on a LAN 434     Step 2: Subscribe Interfaces to Multicast Groups with IGMP 434     Step 3: Verify IGMP Snooping on the Switch 439     Step 4: Configure a Multicast-Enabled Router on the VLAN 440     Step 5: Verify Multicast Operation at Layer 2 443     Step 6: Verify IGMP Snooping 444     Step 7: Verify Multicast Operation at Layer 3 446 Lab 7-2: Routing IP Multicast with PIM Dense Mode (7.5.2) 447     Scenario 447     Step 1: Configure Addressing and Implement IGMP 448     Step 2: Configure EIGRP 451     Step 3: Implement PIM-DM 451     Step 4: Verify PIM Adjacencies 455     Step 5: Verify Multicast Routing Operation 458     Step 6: Verify PIM-DM Flood-and-Prune Behavior 463     Step 7: Explore the Multicast Routing Table 466     Challenge 468     TCL Script Output: Unicast 468 Lab 7-3: Routing IP Multicast with PIM Sparse Mode (7.5.3) 474     Scenario 474     Step 1: Load Initial Configurations 474     Step 3: Implement PIM-SM 478     Step 4: Verify PIM Adjacencies 483     Step 5: Verify Multicast Routing Operation 485     Step 6: Verify PIM-SM Registration and SPT Cutover 490     Conclusion 493 Lab 7-4: Routing IP Multicast with PIM Sparse-Dense Mode (7.5.4) 496     Scenario 496     Step 1: Configure Addressing and Implement IGMP 497     Step 2: Configure Single-Area OSPF 500     Step 3: Implement PIM Sparse-Dense Mode 500     Step 4: Configure PIM Auto-RP 505     Step 5: Verify the RP Mappings 509     Step 6: Verify Multicast Operation 511     Step 7: Explore Auto-RP Operation with Sparse-Dense Mode 513     Step 8: Verify the Operation of Dense-Mode Fallback 515     TCL Script Output 520   Chapter 8 IPv6 527 Lab 8-1: Configuring OSPF for IPv6 (8.7.1) 527     Scenario 527     Step 1: Configuring the Loopback Interfaces 527     Step 2: Configuring Static IPv6 Addresses 528     Step 3: Changing the Link-Local Address on an Interface 529     Step 4: Configuring EUI-64 Addresses 531     Step 5: Enabling IPv6 Routing and CEF 533     Step 6: Setting Up OSPFv3 533     Challenge: Summarizing OSPFv3 Areas 539     TCL Script Output 539 Lab 8-2: Using Manual IPv6 Tunnels (8.7.2) 544     Scenario 544     Step 1: Configure Loopbacks and Physical Interfaces 544     Step 2: Configure EIGRP 545     Step 3: Configure a Manual IPv6 Tunnel 545     Step 4: Configure OSPFv3 Over a Tunnel 546     TCL Script Output 547 Lab 8-3: Configuring 6to4 Tunnels (8.7.3) 552     Scenario 552     Step 1: Configure Loopbacks and Physical Interfaces 552     Step 2: Configure EIGRP 553     Step 3: Configure a Manual IPv6 Tunnel 553     Step 4: Configure Static IPv6 Routes 554     TCL Script Output 556 Lab 8-4: IPv6 Challenge Lab 561 Lab 8-5: IPv6 Troubleshooting Lab 562     Initial Configurations 562   Chapter 9 Case Studies 565 Case Study 1: EIGRP 565 Case Study 2: OSPF: Four Routers 566 Case Study 3: OSPF: Five Routers 568 Case Study 4: BGP 570

Reviews

Author Information

David Kotfila , CCNP, CCAI, is the Director of the Cisco Academy at Rensselaer PolytechnicInstitute (RPI), Troy, New York. Under his direction, 350 students have received their CCNA, 150 studentshave received their CCNP, and 8 students have obtained their CCIE. David is a consultant forCisco, working as a member of the CCNP assessment group. His team at RPI has authored the fournew CCNP lab books for the Academy program. David has served on the National Advisory Council for the Academy program for four years. Previously he was the Senior Training Manager at PSINet, a Tier 1 global Internet service provider.   Joshua Moorhouse, CCNP, recently graduated from Rensselaer Polytechnic Institute (RPI) with a B.S. in Computer Science, where he also worked as a teaching assistant in the Cisco Networking Academy. He currently works as a network engineer at Factset Research Systems in Norwalk, Connecticut.   Ross Wolfson, CCIE No. 16696, recently graduated from Rensselaer Polytechnic Institute (RPI) with a B.S. in Computer Science. He currently works as a network engineer at Factset Research Systems.

Tab Content 6

Author Website:  

Customer Reviews

Recent Reviews

No review item found!

Add your own review!

Countries Available

All regions